Cheetah Mounts Tilt and Swivel Articulating Arm for Plasma LCD TV 32"-55"

The Cheetah Mounts APSAM2 offers 25" extension 180 degrees of swivel and 15 degress of tilt. The APSAM2 is the most economical arm mount on the market. Get the extension and swivel of an arm mount at a price less than many standard flat mounts. The APSAM2 is a truly universal design that will fit virtually any display 32"-55". Specifically, it will fit any hole pattern up to 30" wide and 18" tall. Please Note: Sag and Twist Affect All arm mounts for large displays have sag and twist. When you mount your display, typically weighing between 50 and 100 lbs, the arm will sag. Depending on the weight of the display, how far the arm is extended and how tight the joint bolts are, it may sag as much as 4 inches. Although the sag is noticable, the mount will not break. It is rated at 180 lbs and to achieve this rating it is tested at 360 lbs. Additionally, one side will often sag more than the other. This is twist. You may notice as much as 2 inches of twist on the outside edges of your display. Your arm mount will hold up to 180 lbs, but if you are concerned about sag and twist, you may want to consider one of the dual arm models from Cheetah Mounts sold separately at Amazon. The dual arm designs have significantly less sag and twist. The professional dual arm in particular has less than 1 inch of sag and a rotational TV plate that completely eliminates twist. Product Specifications: Weight Capacity: 180 lbs Tilt: +/- 15 degrees Swivel: 180 degrees 2.5mm steel construction Extended length 25" Folded depth 7" Hole Pattern coverage: 30" wide (762mm) X 18" tall (480mm) 19" Wall plate is 18" wide High Quality Powder Coat Finish 2 cable pass-through holes on wall plate Printed instructions and wall mounting hardware included.